8 Security Tips to Keep in Mind When Building a Smart Home Are you thinking about investing in smart home products for your home? These products can greatly increase the value of your home as well as the enjoyment of your family’s living space. With new prototypes being developed each day, within the next few […]
Here’s a short video I made demonstrating how to use the Telescoping Baluster Marking Tool from L.J. Smith Stair Systems.
Installing a stair guardrail can be a challenging undertaking. The project is more complicated than tread or riser removal, because you’re dealing with precise angles rather than square cuts. The rail system must be securely supported by newels that are solidly fastened to the framing of the floor or wall. The rail must also adhere […]
(guest post by Owen Wright) Do you want to freshen up and give your cabinets a second life? Would you rather consider replacing, refinishing or cabinet refacing? Here is a guide to help you decide. Signs That It Is Time For Change Over time, your cabinets suffer from wear and tear and damage that […]
Okay, back to my ongoing to stair-remodeling series, which you can follow in my previous blog posts here. On the last episode, I had to deal with a surprise: constructing and installing a stair stringer. This time, I’m installing new risers and treads on the upper flight of this split-level staircase (home of the new […]
Back to my ongoing stair remodel… A funny thing happened on the way to installing the remaining treads: Everything went haywire. I’ll try to sum it up as succinctly as possible:
Getting back to my ongoing staircase remodel… I already replaced the lower flight of the split-level stair treads, but I couldn’t replace the upper flight before first removing the handrail. So, this next phase of the project called for some orderly demolition. […]
Our last blog post showed how to remove wooden stair treads. This post will show how to install the new treads, which were provided by L.J. Smith Stair Systems.
Okay, back to my ongoing staircase remodel… You’ll see in earlier blog posts that I’ve already stained and finished the new treads and newel posts. Now it’s time to remove the old treads in preparation for the new ones. Although the old treads weren’t the prettiest pieces in the world, I was hoping to salvage […]
Day 2 of staining the parts of our new stair system involved a lot of repetitive motion. After the wood stain had completely dried on the stair treads, I coated them all with gloss polyurethane. The poly should be applied in thin, successive coats and allowed to completely dry between coats. Before applying a new […]